SLV Up/Down Wall Light Steel Rusty Square 14W 548lm - 830-840 CCT | Outdoor - IP65
£204.98
£170.75
excl. Tax
incl. Tax
+
£0.07
Ecotax
Expected shipping before 13 August
Want to order larger quantities?
- Free shipping above £150 incl. TaxFree shipping above £125 excl. Tax
- Business customer? Purchase on account
- Easy returns within 14 days
Specifications
Clear
General Information
| SKU | 255586 | |
|---|---|---|
| EAN | 4024163248006 | |
| Manufacturer Code | 1004650 | |
| Brand | SLV | |
| Manufacturer Name | RUSTY UP/DOWN WL outdoor LED surface-mounted wall light square rust CCT switch 3000/4000K | |
|
i
Our all-in warranty is fully included in the product price and covers both hidden defects and technical defects of the product that occurred before delivery. The warranty period differs per product and ranges from 1 year to a maximum of 7 years.
|
Any Lamp all-in warranty | 5 Years |
|
i
The lifespan is an indication of the number of hours a product will last. This refers only to the hours the product is actually on. LED lighting has a significantly longer lifespan than conventional lighting. LED lighting therefore lasts much longer. How long you can actually use a product depends on the extent of its (daily) use. |
Average Lifetime (h) | 25000 |
Technical Information
|
i
The technology indicates the operating base of a light source. The most well-known and energy-efficient example is LED. Other techniques include Halogen, gas discharge, TL (fluorescent) and the light bulb.
|
Technology | LED Integrated |
|---|---|---|
|
i
Lighting with a voltage of 220-240 Volt can be connected directly to the mains. Lighting with a different mains voltage (12 Volt and 24 Volt) requires an (electronic) transformer.
|
Voltage (V) | 220-240 |
|
i
The wattage indicates how much energy a light source consumes. With LED lighting, the wattage is considerably lower than with conventional lighting. LED lamps with a higher wattage generally also have a higher light intensity (number of lumens).
|
Wattage | 14W |
|
i
Dimmable bulbs work in combination with a dimmer switch and allow you to determine the desired light output. Dimming also provides energy saving potential because less power is required when the lamp is producing less light.
|
Dimmable | Not Dimmable |
|
i
 The colour code is a combination of colour rendering (CRI) and light colour (Kelvin). The first number indicates the colour rendering (1 = very poor colour rendering, 9 = maximum colour fastness). The second and third number contains the light colour. Example: the colour code 830 consists of good colour rendering (8) and warm white light (3000K). |
Colour Code | 830 Warm White, 840 Cool White |
|
i
|
Colour temperature (Kelvin) | 3000 Warm White, 4000 Cool White |
|
i
Colour rendering is also known as Colour Rendering Index (CRI) and indicates the extent to which a light source reproduces colours, compared to the actual colours in daylight. Products with a good (80-89 Ra) or excellent (90-99 Ra) colour rendering show minimal deviations in the colour spectrum.
|
Colour Rendering (Ra) | 80-89 |
|
i
The light color indicates the color of the light emitted: white, colored, or UV. For many products in our assortment, the light is white, available in a range from very warm white to daylight white (expressed in Kelvin). With colored light, you have two options: 1. A single fixed color, such as red or green. 2. RGBW, which means you can adjust the light color at any time: white or colored.
|
Colour of Light | White |
|
i
The colour control type tells you in which way you can regulate the colour of the light. You have the following options:
By choosing your preferred light colour options, you are one step closer to the right light product. |
Light colour options | CCT |
|
i
The number of lumens (lm) is the light output of a light source. The higher the number of lumens, the more light the light source emits. The wattage and the number of lumens are not connected to each other. An LED lamp with a low wattage can have a higher number of lumens than a conventional lamp with a high wattage.
|
Luminous Flux (Lumen) | 548lm |
|
i
The Luminous Efficacy (lm/W) indicates how efficiently a light source uses energy. We divide the number of lumens by the wattage. The higher the number, the more efficient a product is in terms of energy consumption. LED lighting has a considerably higher lumen/Watt ratio than conventional lighting.
|
Lumen per watt | 39.1 |
|
i
A fixture with a tiltable design makes it possible to direct the lighting specifically at an object or surface. This can play a particularly important role in shops (putting a new collection in the spotlight) or galleries (accentuating works of art). It can also influence the purchasing behaviour or interpretation of visitors.
|
Tiltable | No |
|
i
 Are you specifically looking for an (LED) fixture that you can install on the ceiling, wall or floor? With this filter, you can easily select your preferred type of mounting. Please note that certain fixtures can be mounted in multiple ways using the installation materials supplied (e.g. a LED bulkhead). Mounting is also possible using individually purchasable fixture accessories, such as a frame or suspension kit for a LED panel. |
Mounting Method | Wall mounted |
|
i
 Lighting with a built-in emergency lighting unit (battery) continues to burn for a certain time if the power fails. |
Emergency Lighting | No Emergency Unit |
| Product Type Category | LED Decorative Lighting |
Fixture Information
| Fixture Connection | PI [Push-in connector 3-pole] | |
|---|---|---|
|
i
 The IP value indicates the degree of protection against the ingress of moisture and dust. The 1st digit (0 = not protected until 6 = completely dustproof) indicates the protection against dust. The 2nd digit (0 = not protected until 8 = protected against immersion) indicates the protection against water. Products with an IP44 rating are splashproof and products with an IP65 rating or higher are (completely) dustproof and waterproof. |
IP-Rating | IP65 |
|
i
 The impact protection value (IK) stands for impact resistance and protection against vandalism. This is expressed in combination with 2 digits (IK00 - IK10). Products with IK00 are not protected against resistance. Products with IK10 offer resistance to shocks of 20 Joule and are also vandal-proof. |
Impact Protection (IK) | IK02 - 0.20 joule |
| Operating Temperature | -20 to +45 | |
|
i
The colour of the fixture can play a major role in the interior design of a room. You can opt for a neutral white design or a darker colour, such as black or silver, to make the light source stand out or even turn it into a decorative feature on its own.
|
Colour of the Fixture | Rusty |
| Housing | Steel | |
| Series | Rusty |
Dimensions
|
i
It may happen that the length of this product differs from your old lighting fixture. As a result, the product does not fit in your current fixture or in the relevant place.
|
Length (mm) | 145 |
|---|---|---|
| Width (mm) | 180 | |
| Height (mm) | 165 |
Sensor Information
|
i
Lighting with a sensor only turns on when it receives a specific signal. This reduces energy costs. The (built-in) sensors respond to darkness (twilight switch) and/or movement (motion sensor).
|
Type of sensor | No Sensor |
|---|
Downloads
Description SLV Up/Down Wall Light Steel Rusty Square 14W 548lm - 830-840 CCT | Outdoor - IP65
Introduction
Wall light in a modern design brings a refined presence to the patio, entrance, and façade. The rust-finished Fecsi steel adds architectural character, while the up and down light effect and CCT switch create a versatile atmosphere that feels both stylish and inviting.
Benefits
- Up and down lighting adds depth and dimension to exterior walls.
- Choose between 3000K and 4000K for the right mood.
- IP65 protection supports reliable outdoor placement.
- Surface-mounted design creates a clean, composed look.
- Two integrated LED light sources deliver a balanced visual effect.
- Rust finish brings warmth and contrast to modern architecture.
Applications
- Entrance area: Creates a welcoming first impression with elegant wall accents that guide the eye and enhance the approach.
- Façade: Highlights architectural lines and surface texture with focused light and a striking sense of depth.
- Patio: Adds atmosphere and practical light for seating areas, movement, and relaxed evening moments outdoors.
- Garden wall: Works as a decorative feature that complements rustic materials as well as contemporary finishes.
Installation
Designed for 220-240 V AC operation, this wall-mounted luminaire is made for straightforward exterior use. Its IP65 rating supports outdoor installation, while light output depends on the installed light source and control gear. Dimming is not available. The fixture includes two non-replaceable LED light sources and mounting material.
FAQ
What light source does it use?
It uses two LED light sources, which are included. The fixture is specified with an other lamp holder and the light sources are non-replaceable.
Is it dimmable?
No, this wall light is not dimmable. It is specified as non-dimmable, including with 0-10 V, DALI, phase-cut, Zigbee, and other systems.
Can it be used outdoors?
Yes, it is suitable for outdoor use thanks to IP65 protection. It is designed for wall installation on exterior areas such as patios and façades.
What material and finish does it have?
The housing is made of Fecsi steel with a rust finish. The lacquered surface gives the fixture its distinctive, architectural character.
Related products
£186.48
£155.33
excl. Tax
incl. Tax
